User's Manual

7766
This is the user ID to connect to an access point. The network should provide this
value.
� User ID
The settings of this service are valid only when the bearer is configured as “GPRS”.
2-8 GPRS Bearer Setting
You can change the name of a Profile.
3. Change Name
You can delete a Profile saved in the Profile List.
4. Delete Profile
You can enter the IP address of the WAP gateway that is used to connect to a WAP
page.
� IP Address
You have to enter the WAP gateway APN to connect to a WAP page.
The network should provide this value. The default value is
“cmwap”.
� Access Point Name
This is the password to connect to an access point (not for a WAP gateway).
The network should provide this value.
� Password
The user has to determine the timeout period from three choices (30, 60, or 120).
Even if the user did not successfully send or receive the data during the determined
timeout period while using the browser, the respective data request will
automatically end when the timeout period ends. From the current screen, the user
can view the cards effectively stored in the handset cache of the memory through the
WML cards, or via “Offline”, but from the current screen, if the user chooses the
linked card not stored in the cache, a new data call will be requested.
� Timeout
TDC-320 GSM-3EN 2004.7.1 1:49 PM 페이지30 (1,1)