User's Manual

Bellsouth feature list
Scan Function
The Scan activity is working in an endless channel loop from 1 to 14
Press Scan Key to activate channel scan
1. check the detected channel by the 200msec
2. Scan Icon symbol is on the LCD.
3. Resume time keeps for 4 seconds
4. When an active signal is detected , Scan is paused keeping the active signal broadcasted.
Operate PTT or external PTT . then Scan is stopped ant the active channel
Low battery Detect
When the battery level is low, the battery icon will flash to indicate that the batteries need to
be replaced
Power Saving
The purpose of Power Saving is to maximize battery life.
Power Saving Start
!
After Power On (3) seconds elapse
!
After stop transmitting (3) seconds elapse
!
After stop receiving (3) seconds elapse
Power Saving releasing
!
Transmission
!
Receiving(Carrier Detect)
!
Monitor Operation
!
FM Mode
NOTICE TO USERS
The users manual or instruction manual shall include the following statement:
Warning: Adjustment to this unit or replacement of any transmitter component(crystal,
semiconductor, etc.) to this unit that could result in a violation of the rules.
NOTE;
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful Interference in a residential installation. This equipment generates, users
and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction, may cause harmful interference to radio communication
.
However, there is no guarantee that interference will not occur in a particular installation. If this