User's Manual

Bellsouth feature list
PTT
PTT Button company following functions.
-
Get user to talk by the button.
–
Return to basic mode from Programmable CH/Tone change mode
External PTT
The set could transmit by External PTT key
PTT Transmission
Press the PTT key for transmission, speak slowly and clearly in a normal voice about 2 ~ 3 inchs away
from microphone the radio transmits the signal and TX LED (RED) is on at the moment. If release the
PTT key, it stops transmitting and returns to stand-by condition in order to receive signal
Call Function
Press and release the Call key to transmit an audible Call Tone. The unit rings for 1200msec.
The unit automatically returns to receive/stand-by mode when the Call transmission is over.
Receive
The unit begins message reception with speaker open when correct signal is received.
Channel Select
Channel digits are firstly blinking when menu button is pressed once. Then Press up or down
key to a desired key to a desired channel, while in channel selection mode back light is on
and channel digits keep blinking
The release of channel selecting mode is operated by one of following key function.
1. Menu ,2. PTT, 3. Call,4. Time out ( after 4sec) ,5. Lamp/key Lock. LCD back light is on in
channel select mode, then it return to stand-by condition.
The selected channel is retained and recalled when the unit is turned off and on even
battery is replaced. Pressing Up/Down key for 200msec, it checks existence of carrier as
repeat mode
Channel list
Channel Frequency Channel Frequency
1 462.5625MHz 8 467.5625MHz
2 462.5875MHz 9 467.5775MHz
3 462.6125MHz 10 467.6125MHz
4 462.6375MHz 11 467.6375MHz
5 462.6625MHz 12 467.6625MHz
6 462.6875MHz 13 467.6875MHz
7 462.7125MHz 14 467.7125MHz