PCM-1930 User Manual PCM-1930 User Manual • Note : System Requirements • OS : User environment of Windows 95/98 ( Windows 2000 compatibility to next ) • Compatible with IBM-PC more than Pentium CPU • Memory : 32MB or higher • VGA : 640 ×480 16bit or higher color PCMPCM-1930 User program set up 1. Insert the provided CD-ROM on your 2. Choose [Start]-[Run] 3. Input “D:\setup.exe” into a “Open”. ( if in case of CD-ROM Drive is D: ) Change the used drive if CD-ROM Drive is not D: .
PCM-1930 User Manual 6. This step decides on ones folder of installed program. Fundamentally, installed at the c: \Program File\TelsonIC \WeiNet If you want to install at desired folder, press the “Browse…” button and change the drive and folder.
PCM-1930 User Manual 7. You can execute via [Start]-[Program] 8. Press Next to begin set up.
PCM-1930 User Manual 9. Press Finish to complete set up. 10. Insert PCM -1930 PCMCIA Card in the PCMCIA slot and then, use PCM-830 PCMCIA Card by running the Device drive.