User Manual

3 Setting up your router
3.1 Installation
After you unpack the box, follow the steps, documented below, in order to properly connect the device. For better
WiFi performance, put the device in clearly visible spot, as obstacles such as walls and door hinder the signal.
1. First assemble your router by attaching the necessary antennas and inserting the SIM card.
2. To power up your router, please use the power adapter included in the box. (IMPORTANT: Using a different power
adapter can damage and void the warranty for this product.).
3. If you have a wired broadband connection you will also have to connect it to the WAN port of the router.
3.1.1 Front Panel and Back Panel
1
LAN Ethernet ports
1
WiFi antenna connector
2
WAN/LAN Ethernet port
2
LTE antenna connectors
3
LAN LED
3
Reset button
4
WAN LED
5
Power connector
6
Power LED
7
Signal strength indication LEDs
8
SIM card holder
3.1.2 Power connector
No.
Description
Wire color
1
Power
Red
2
Ground
Black
3
Input
Green
4
Output
White
3.1.3 Connection status LED
Explanation of connection status LED indication:
1. Signal strength status LED’s turned on: router is turning on;