User Manual

26
6.3.1.4.2 Access Point
Display information about wireless connection (Access Point mode).
Wireless AP information
Field Name
Sample Value
Explanation
1.
Channel
1 (2.41 GHz)
The channel which is used to broadcast the SSID and to establish
new connections to devices.
2.
Country code
00(World)
Country code.
3.
SSID
RUT200_test
The SSID that is being broadcast. Other devices will see this and will
be able to use to connect to your wireless network.
4.
Mode
Access Point (AP)
Connection mode – Access Point (AP) indicates that your router is an
access point.
5.
Encryption
Mixed WPA/WPA2 PSK
(CCMP)
The type of encryption that the router will use to authenticate,
establish and maintain a connection.
6.
Wireless MAC
00:1E:42:00:02:1F
MAC address of your wireless radio.
7.
Signal Quality
000%
The quality between routers radio and some other device that is
connecting to the router. Will show 0% if no devices are trying to
connect or are currently maintaining a connection.
8.
Bit rate
52.0 Mbit/s
The bit rate will be shared between all devices that connect to the
routers wireless network.
Additional note: MBit/s indicates the bits not bytes. To get the throughput in bytes divide the bit value by 8, for e.g.
54MBits/s would be 6.75MB/s (Mega Bytes per second).