User Manual

45
DHCP mode: Dynamic
When using Dynamic mode, the device will get an IP from the GSM operator, which connects to the router first.
When using Passthrough in dynamic mode, the DHCP in LAN configuration will be disabled.
DHCP mode: No DHCP
Using no DHCP mode, the IP (also subnet, gateway and DNS) should be entered manually on your device which you
are trying to connect to the router’s LAN. When using Passthrough in no DHCP mode, the DHCP in LAN configuration will
be disabled.
7.1.1.2 Mobile Data On Demand
Field name
Possible values
Explanation
1.
Enable
Enable/Disable
Mobile Data On Demand function enables you to keep mobile data
connection on only when it's in use.
2.
No data
timeout(sec)
10-99999999
The time it takes for mobile data connection to be terminated if there
is no network activity.
7.1.2 Mobile Data Limit
This function lets you limit maximum amount of data transferred on WAN interface in order to minimize unwanted
traffic costs.
7.1.2.1 Data Connection Limit Configuration
* Your carrier's data usage accounting may
differ. Teltonika is not liable should any accounting discrepancies occur.