User Manual

59
7.4 Wireless
On this page you can configure your wireless settings. Depending on whether your WAN mode is set to WiFi or not,
the page will display either the options for configuring an Access Point or options for configuring a connection to a local
access point.
Access Point:
Here you can see the Overview of the wireless configuration. It is divided into two main sections – device and
interface. One is dedicated to configuring hardware parameters, the other – software.
Here you can toggle the availability of the wireless radio and the physical channel frequency.
Important note: As seen in the picture you should always Save before toggling the radio on and off.
SSID – Your wireless network’s identification string. This is the name of your WiFi network. When other WiFi capable
computers or devices scan the area for WiFi networks they will see your network with this name.
Hide SSID – Will render your SSID hidden from other devices that try to scan the area.
Connect to WRP100 automatically – let Teltonika WRP100 wireless repeater connect to this router automatically.