User Manual

First select an encryption method: TKIP, CCMP, TKIP&CCMP and auto. Note: Some authentication methods won’t

support TKIP (and TKIP&CCMP) encryption. After you’ve selected your encryption method, you should enter your pass

phrase, which must be at least 8 characters long.

7.4.1.2.2 MAC-Filter

Filter – you can define a rule for what to do with the MAC list you’ve defined. You can either allow only the listed

MACs or allow ALL, but forbid the listed ones.

7.4.1.2.3 Advanced settings

Separate clients – prevents WiFi clients from communicating with each other on the same subnet.

Increase TTL packet size – increase TTL packet size for incoming packets.

7.4.1.3 Client

RUT230 can work as a WiFi client. Client mode is nearly identical to AP, except for the fact that most of the options

are dictated by the wireless access point that the router is connecting to. Changing them can result in an interrupted

connection to an AP.

In addition to standard options you can also click the Scan button to re-scan the surrounding area to attempt to

connect to a new wireless access point.