User's Manual

BSR75 USER AND
INSTALLATION
MANUAL
Code: D138X61PT_DDS06
Date: 14-09-16 Page: 5 of 21
01.01.00/1 Rev.1
2. UNPACKING AND CHECKING
The following elements are supplied in the box:
BSR75
Power Supply Cable
Maintenance Cable
Two Ethernet Cables
The equipment is supplied with all the modules already assembled in the rack. The
modules in the basic configuration are: Power Supply module (RPS), Power Amplifier
(RPA75), Transmitter (RTX75), Receiver (RRX) and Control (RCPU). Synchronism
module (BSYNC) is necessary for testing purposes.
IMPORTANT: if any of these elements is missing or damaged, contact your dealer
and / or installer.
3. PREVIOUS CONSIDERATIONS
This manual contains information on instructions for installation, maintenance and
use. Read the following pages before using this equipment.
Do not switch on the BSR75 without having previously connected the TX antenna.
The equipment may be seriously damaged. It is important to use an antenna adjusted to
the BSR75 transmitter frequency band.
4. LABELLING AND INFORMATION ON SAFETY AND ELECTROMAGNETIC
COMPATIBILITY
The equipment is supplied with an identification label where the model, the IC
Certificate number and the FCC ID are displayed depending on the frequency work band.