User's Manual

BSR75 USER AND
INSTALLATION
MANUAL
Code: D138X61PT_DDS06
Date: 14-09-16 Page: 7 of 21
01.01.00/1 Rev.1
In any case, take the following points into consideration:
q Most electronic equipments are susceptible to electromagnetic interference if
they are not duly protected. If the BSR75 is placed near unprotected
electronic devices, they may malfunction.
q The BSR75 must not transmit without its antenna connected.
q When installing the antenna, follow the guidelines for exposure of the human
body to high and low frequency electromagnetic fields. Follow the supplier’s /
manufacturer’s instructions.
q Burns may be suffered if the antenna connector output of the power module
(RPA75) is touched by bare skin when the BSR75 is transmitting with the
antenna disconnected.
q Take care when handling the BSR75. It has sharp edges, which may cut if
handled incorrectly.
q Maintenance and repair of these repeaters must be carried out by qualified
personnel only.
q Connect the BSR75 chassis to the earth intake in the cabinet where it is to be
installed.
q Switch off the BSR75 before inserting/removing any of its modules
!