User's Manual

User Guide
- 34 -
en
7.3 Status messages
A status message is a numeric code associated with a predefined fixed text. These messages
are programmed into the terminal.
Select the message to send from the list found in the menu Status\Outbox.
After selecting the message, press the Send soft-key to select the destination.
You can send status messages to individual numbers (private addresses or telephone
numbers) or group addresses stored in the group phonebook, or dial the destination number
directly.
While you are introducing the number, the Mode soft-key enables you to select the address
type.
Then press the green key
to send the message.
The terminal will indicate the result of the operation with an information message.
No action is necessary to receive status messages. When you receive one, you will hear a
characteristic tone and the symbol
will indicate in the lower right of the screen that there is
a new message to read.
In the Status\Inbox menu you can consult all your received status messages.