User's Manual

--------------------------------------------------------------------------------------- -------------------------------------
10 QUICK GUIDE
This section is a quick reference containing some basic tips about using the PowerTrunk HTT-
500 terminal. For detailed information, carefully read the rest of the sections.
SWITCHING ON AND OFF
Keep the button pressed for a few seconds.
CHANGING OPERATION MODE (V+D / DMO)
DESCRIPTION OF THE MAIN MENU
The arrows and soft-keys are for
navigating through the different graphic
menus.
The red hang-up key allows you to leave
any menu or sub-menu and return to the
main screen, cancelling any action
underway.
(ATTENTION) The configuration of
the menus and certain options could vary
according to the programming of the
terminal. Consult your supplier about the
functions available on your terminal.
No. Description No. Description
1 Microspeaker connector 11 Red hang-up key
2 Volume control (rotary
switch)
12 PTT
3 Screen 13 Auxiliary button 1
4 LED 14 Auxiliary button 2
5 On/off button 15 Speaker 1 (half-duplex calls)
6 Up/down arrows (2) 16 Speaker 2 (duplex calls)
7 Alphanumeric keys 17 Microphone 1 (half-duplex
calls)
8 Emergency button 18 Microphone 2 (duplex calls)
9 Soft keys (2) 19 Auxiliary connector
10 Green call key 20 Vehicular antenna connector
Main screen
Soft Key 1: Menu
Go to
“Modes”
OK
Select “V+D”
Select “DMO”