User's Manual

User Manual
8
en
MDT-400 / DT-410 is restricted to occupational/controller use to safety FCC RF
energy exposure limits. This radio is NOT authorized for general population.
Use only accessories and antennas approved by PowerTrunk. Use of non-approved
accessories and antennas may exceed FCC RF energy exposure limits.
4.3 Electromagnetic compatibility
Most electronic devices can suffer from electromagnetic interference unless they are
conveniently screened, designed or configured for electromagnetic compatibility.
To avoid these compatibility conflicts, it is necessary to respect current local regulations. This
equipment complies with the requirements of Council Directive 89/336/EEC on
electromagnetic compatibility, as well as Council Directive 95/54/CE regarding motor-vehicle
installations.
Vehicular Installation
The MDT-400 / DT-410 terminal must be supplied with a continuous
nominal 12V voltage in equipment terminals (minimum 10.8V,
maximum 15.6 V).
It must be taken into account that some mobile digital devices may interfere with hearing aids
or other medical devices. If this interference were to occur, please contact your service
provider or consult with the manufacturer of the hearing aid or medical device.
Using two TETRA devices with antennas in close proximity may cause mutual interference. If
this were to occur, separate the antennas until the interference disappears.