User's Manual

TRM-300 / Integration guide
F070033PT_5.1_en
Page 11 of 26
en
8 MECHANICAL INTEGRATION
The following table defines the required environment conditions:
A mechanical enclosure is required of the integrator for environment protection.
There are two possible mountings for the TRM-300; standard mounting and mounting with heatsink.
8.1 STANDARD MOUNTING
PowerTrunk recommends its Standard Mounting Kit, which is included in the pack.
Place the TRM-300 so that the labels are visible.
Ensure the instructions of the section 8.3 are carried
out, regarding this hole specifically.
In the other three holes, fix the TRM-300 to the
spacers with screws (11mm -0.43 inches- length)
and washers.
Fix the four spacers with screws and washers to a
flat surface, in which four holes have been drilled
according to the file D288W21NX_SP01.
Parameter
Specification Limit
Operating temperature
From -30ºC up to +60ºC (from -22ºF up to 140ºF)
Storage temperature
From -40ºC up to +85ºC (from -40ºF up to 185ºF)