User's Manual

TRM-300 / Integration guide
F070033PT_5.1_en
Page 13 of 26
en
8.3 POWER AUXILIARY CABLE
This section is common to both mountings.
Insert the power auxiliary cable (DC-plug) in the TRM-300 power supply connector (DC-jack).
Fix the clamping element to the TRM-300 and to the spacer with a screw (11mm -0.43 inches- length) and a
washer, in order to assure the mechanical requirements.
8.4 CARE AND MAINTENANCE
The following recommendations will help increasing the useful life of your terminal and protecting the cover of
your guarantee:
- Do not use the terminal in dirty or dusty places. The electronic components could be damaged.
- Do not expose the terminal to extreme temperatures, for example by a window with direct sunlight.
The terminal should be situated away from heat sources such as radiators, heat registers, stoves or
other equipment that produce heat.
The high temperatures may reduce the useful life of the electronic components.
- Do not keep the terminal in cold places. When the device returns to its normal temperature, moisture
may form inside, which may damage the electronic components.
- Do not hit or drop the terminal. The electronic components and the mechanical parts may break.
- Do not place any heavy object on top of the terminal or on its power cable.
The electronic components and the mechanical parts may break.
- Do not insert any object in the grooves of the terminal. The electronic components could be damaged
- Install the terminal in a well-ventilated place.
Power auxiliary cable
Clamping element
DC-plug
Spacer
Screw
Washer