User's Manual

TRM-300 / Integration guide
F070033PT_5.1_en
Page 9 of 26
en
6 ESD HANDLING PRECAUTIONS
This product is sensitive to electro-static discharge. Therefore, ESD handling precautions are to be carefully
observed:
- Handle the product only while wearing a grounded wrist (or similar device) strap and working at a static
free workstation.
- The product should be stored in an antistatic bag and in its original shipping packaging.
- If a wrist strap (or similar device) and static free workstation are not available, and the product must
be handled, use the following procedure to reduce the possibility of ESD damage.
- To discharge any static charge from your body, place one hand in contact with a grounded surface
before touching the product.
Keep your hand in contact with that grounded surface while handling the product. Do not touch any of
the electronic components and pick up the board only at the edges.
- Do not set the board down on a worksurface.
- Return boards to anti-static bags as soon as possible.