User's Manual

Phonecell
®
SX5 CDMA 4 User Manual
Wall-Mounting
1. Remove the mounting clip from the cradle and re-insert it with the tab pointing up - see
Figures 11 and 12.
2. Slide the wedge tabs on the thin end of the wedge into the bottom tab slots on the SX5 - see
Figure 13.
NOTE: Holding the wedge at an angle makes it easier to slide the wedge tabs into the bottom
tab slots.
3. Snap the wedge tabs on the thick end of
the wedge into the top tab slots - see
Figure 14. The wedge will fit snugly, so it
may be necessary to press the thick end
of the wedge towards the bottom tab slots
(if the wedge tabs at the thin end have
been inserted) in order to snap it into the
top tab slots.
Insert
Mounting
Clip into
the Cradle
(tab up)
Mounting Clip in
Cradle (tab up)
Figure 12 – Handset mounting clip for wall-mount.
Remove
Mounting Clip
from the Cradle
(tab down)
Figure 11 – Handset mounting clip assembly.
Attach thick end of
wedge at bottom
of the SX5.
Figure 14 - Wedge attached for wall-mounting.
Top tab slots
Bottom tab slots
Wedge tabs
Wedge tabs
Figure 13 - Tab slots and wedge tabs.