User's Manual

Battery Operation
The unit will not automatically switch from AC to battery upon loss of AC power. The AC/Battery
switch must be changed manually to the battery position - see Figure 5. Battery power will pro-
vide up to 4 hours of talk time and 11 hours of standby.
Location and Setup
The SX5 comes with a standard spike antenna (TNC).
1. Attach and finger-tighten the antenna - see Figure 6. Do not over-tighten the antenna.
2. Select a location that is above ground and as close to windows (or exterior walls) as possible
to get the best signal - see Figure 7.
Connect the Handset
Before you can use the SX5, you must connect the handset cable.
1. Connect the handset cable to the phone jack - see Figure 8.
2. Connect the handset cable to the handset - see Figure 8.
Phone jack
Handset cable
Figure 6 - Attach the antenna.
Figure 7 - SX5 location.
Handset
AC/Battery Switch
Battery Position
AC Position / Power On
Figure 5 – AC battery Switch.
Figure 8 – SX5 handset connection.
Phonecell
®
SX5 CDMA 2 User Manual