User Manual

SUPPLEMENTARY FEATURES (NETWORK DEPENDENT)
Call Forwarding
Call Forwarding allows you to forward your incoming calls to
another telephone number, even if your phone is turned off. You
can specify the criteria for calls to be forwarded. Options are: all
calls, calls that come in when your line is busy, calls that are not
answered after a specified number of rings, or calls that come in
when the SX5D is powered off or has lost the network signal (Not
Found). You can also specify certain types of calls to forward,
such as voice, data, fax, or text messages. Contact your service
provider to activate Call Forwarding.
To Turn On Call Forwarding
1) Press the MENU key.
2) Scroll to and select Call Divert.
3) Select the criteria you wish to use for forwarding calls (All
Calls, When Busy, No Answer, Not Found).
4) Select On
5) To choose which types of calls to forward, select By Service
6) Highlight the service you wish to forward, then press SELECT.
The default is All Services.
Call Waiting
Call Waiting alerts you to a second incoming call while you are on the phone. To respond to Call
Waiting, press the Flash key or the hook switch. Contact your service provider to activate Call
Waiting.
To Turn On Call Waiting
1) Press the MENU key.
2) Select Settings
3) Select Call Settings.
4) Select Call waiting.
5) Select On.
Multiparty Calling
Multiparty Calling allows you to connect a three-way conversation, or transfer a call. Contact
your service provider to activate Three-Way Calling.
To Engage a Multiparty Call
1) While in a call, put the call on hold.
2) Dial a second call, then press the Flash button to connect it.
3) When the second call is answered, press the MENU key and
select Multiparty
5) Select the option you wish to use.
Join All: Join the active call with the held multiparty call.
Hold All: Place multiparty call on hold.
Next: Display the next call party in a multiparty call.
Transfer: Connects one call party to another call party and allows the user to leave the call.
Exclude: Place the selected party of a multiparty call on hold
Private: Hold a private call with one party in a multiparty call. Other parties are put on hold.
I am busy: User defined user busy (UDUB) indicates BUSY to a waiting caller.
End All: End active and held calls.
NOTE: You will only see options available dependant on the status of the call or calls. For
example, if you only have one other person in the call, you will only get the End All option, or if
you have already joined all the calls, you will not see the Join All option.
Phonecell
®
SX5D 23 Technical Manual
Call Forwarding Step 4
Call Forwarding Step 6
Call Forwarding Step 2
Multiparty call