manual

5
SIP Calling with telyHD Pro
SIP (Session Initiation Protocol) Settings
Press the
Menu button on the remote and go to
Settings > System > SIP Settings
The following are elds in the SIP Settings Menu. Some of
these elds may not be required, depending on your specic
SIP service. For questions, please contact your network
administrator.
Enable BFCP Data Sharing
º
Enable or disable BFCP
SIP Domain
º
Enter domain for the SIP service. This is also
known as “realm.”
Username
º
Enter username for the SIP server.
Transport
º Select a transport type. If a certain transport type is
selected, it will be used exclusively going forward. The
transport type can be TCP, UDP, or TLS.
Enable Proxy
º
Enable or disable (default) proxy server.
Enable Registration
º
Register to a SIP registrar server and enter optional
authentication username or password.
Ensure that the following rewall ports are open:
SIP 5060-5061 TCP
For full list of necessary ports please refer to page 10.
Making a SIP Call
Note: Select the SIP Call card from the main screen.
Supported connections
• SIP account
• IP address
Use one of the following options to place a SIP call.
Dial
º
Enter the SIP address ([e-mail]) or IP address
(10.10.10.10.) of the endpoint you wish to call.
º
An address can be added to the Contacts list by "Saving"
the entry.
Recents
º
Provides a list of all SIP calls, called or received.
Contacts
º
Select a contact and place a SIP call to the address speci-
ed.
º Search against all SIP contacts using the search box.
º Press the right arrow to edit a selected entry.
Main Screen
Make a call
Leverage existing SIP infrastructure
Nework
Self-view