Use and Care Manual

11.2 Back wall

A. Install closed cell gasket 28 on stationary panel 9

B. Install second panel 9 and bolt with (7) bolts 5/16” nuts 29 and

bolts 30 to stationary panel 9

C. Attach panel 24 to panel 9 in similar fashion

D. Install wall cap 25 by placing the cap on panel 9 no retaining screws

will be used

E. Continue to attach panel 9 to end of wall

F. Attach panel 10 to panel 9 and to floor

NOTE:

Apply closed cell gasket for every joint and install 7 nuts and bolts

per joint.

REV. 022014