Instructions

930XC-20C • 930XC-20M • 930XC-30F • 930XC-30P

Tempo Communications Inc. 1390 Aspen Way • Vista, CA 92081 USA • 800-642-2155

Press to exit.

Use t and u to adjust the position of the highlighted area. Use p and q to change the digits. After setting, press Enter to

conrm.

Non-reection Threshold Conguration

This conguration has direct impact on the listing of insertion loss events. Only events ≥ to this threshold will be listed.

Under the parameter conguration menu use p and q to highlight “Nre. Thre.” Press Enter to enter a value (Figure 3-19).

Press to exit.

Use t and u to adjust the position of the highlighted area. Use p and q to change the digits. After setting, press Enter to

conrm.

Note: The default setting is “0.20 dB.”

Reection Threshold Conguration

This conguration has direct impact on reection events listing. Only reection events ≥ to this threshold will be displayed in the

events list.

Under the parameter conguration menu use p and q to highlight “Re. Thre.” Press Enter to enter a value (Figure 3-20).

Press to exit.

Use t and u to adjust the position of the highlighted area. Use p and q to change the digits. After setting, press Enter to

conrm.

Note: The default setting is “–52.00 dB.”

Figure 3-19. Non-reection Threshold Conguration

Figure 3-20. Reection Threshold Conguration