Instructions

930XC-20C • 930XC-20M • 930XC-30F • 930XC-30P
Tempo Communications Inc. 1390 Aspen Way • Vista, CA 92081 USA • 800-642-2155
22
End Threshold Conguration
This threshold is the end threshold of optical ber. If the end threshold equals 3.0 dB, then the rst event with insertion loss ≥ 3
dB will be considered the end of the optical ber. If the value is set to 0 dB, there will be no end threshold.
Under the parameter conguration menu use p and q to highlight “End Thre.” Press Enter to enter a value (Figure 3-21).
Press to exit.
Use t and u to adjust the position of the highlighted area. Use p and q to change the digits. After setting, press Enter to
conrm.
Note: The default setting is “03.00 dB.”
Delete File
This function deletes saved traces.
Under the parameter conguration menu use p and q to highlight “Delete File.” Press Enter to enter (Figure 3-22).
Press to exit.
Use p and q to choose the les to delete, and press Enter to conrm. Or use the arrow keys to choose “SelAll,” and press Enter
to select all les.
One or several les can be deleted at a time. Use the arrow keys to select “Delete.” Press Enter, and choose “Yes” to delete or
“No” to not delete. Choosing “Cancel” will exit the Delete menu.
Figure 3-21. End Threshold Conguration
Figure 3-22. Delete File