Instructions
930XC-20C • 930XC-20M • 930XC-30F • 930XC-30P
31
Tempo Communications Inc. 1390 Aspen Way • Vista, CA 92081 USA • 800-642-2155
2. Input le name: Use p, q, t, and u to choose the alphanumeric characters one by one, and then press Enter to
conrm. The lename can be a maximum of eight characters in length.
3. Save le: Use p, q, t, and u to highlight “OK,” and then press Enter to save.
4. Cancel saving le: Use p, q, t, and u to highlight “Cancel,” and then press Enter to cancel the save le operation.
5. Delete alphanumeric characters: Use p, q, t, and u to highlight “Delete,” and then press Enter to delete the
characters.
6. Memory space: “118/1000” means that total memory space is 1000 les; 118 les have been saved so far.
Browse Saved Traces
1. Under GUI (Figure 4-4) use p and q to highlight , and then press Enter to conrm (Figure 4-7).
2. Use p and q to highlight the trace, and then use t and u to choose “Open” or “Cancel.” Press Enter to conrm.
3. Memory space: “118/1000” means that total memory space is 1000 les; 118 les have been saved so far.
Alter Measurements in Realtime Testing
To alter measurements in realtime testing, follow these steps:
1. Use p and q to highlight (i.e., parameter conguration), and then press Enter. A parameter box will appear at the
bottom of the screen.
2. Use t and u to move to the parameter to be changed (Figure 4-9), and then press Enter.
3. Use p and q to change the value. Select “Averaging” to choose Averaging testing.
4. Press “OK” to exit the parameter conguration menu.
Figure 4-7. Browse Saved Traces
Figure 4-9. Alter Measurements in Realtime Testing