Instructions
930XC-20C • 930XC-20M • 930XC-30F • 930XC-30P
33
Tempo Communications Inc. 1390 Aspen Way • Vista, CA 92081 USA • 800-642-2155
Stabilized Laser Source Settings
1. Enter PM/LS interface as described in “Power Meter, Laser Source, and VFL Conguration” in Section 3. Use p and q to
highlight “SLS”, and press Enter to enter SLS interface (Figure 4-12).
2. Use t and u to toggle between SLS working wavelengths. Press Enter to enter SLS setting interface (Figure 4-13).
3. Use p and q to highlight the parameter to be adjusted, press Enter to conrm, and press to exit setting.
Visible Fault Locator Settings
1. Enter PM/LS interface as described in “Power Meter, Laser Source, and VFL Conguration” in Section 3. Use p and q to
highlight “VFL”, and press Enter to enter VFL interface (Figure 4-14).
Figure 4-12. Stabilized Laser Source
Figure 4-13. Stabilized Laser Source Setting
Figure 4-12. Stabilized Laser Source