Instructions

930XC-20C • 930XC-20M • 930XC-30F • 930XC-30P
41
Tempo Communications Inc. 1390 Aspen Way • Vista, CA 92081 USA • 800-642-2155
46
Greenlee / A Textron Company
Stabilized Laser Source Module
Specication 930XC-20C 930XC-20M 930XC-30F 930XC-30P
Wavelength Same as OTDR working wavelength
Output Power (dBm) ≥ –7
Optical Power Meter Module
Specication 930XC-20C 930XC-20M 930XC-30F 930XC-30P
Calibrated Wavelength (nm) 850/1300/1310/1490/1550/1625
Power Range (dBm) –70 ~ +6 (–60 ~ +6 @ 850 nm)
Detector Type InGaAs
Display Resolution (dB) 0.01
Accuracy ±5% ±0.01 nW (±0.5 dB @ 850 nm)
MOD Identication 1 K, 2 K Hz
Section 6
47
930XC-20C • 930XC-20M • 930XC-30F • 930XC-30P Instruction Manual
Section 7. OTDR Trace Viewer Software
Trace Viewer software is an application developed for the 930XC OTDR. It allows the previously
stored measurement records in the instrument to be uploaded to a PC and to be displayed, saved,
or printed. This software provides a convenient data management function, which includes:
editing, analysis, browsing, saving, backup, printing, and ASCII format output.
Software Installation
Computer System Requirements
Requirements for operating system and hardware:
• PC with Intel Pentium III processor or higher
• Microsoft
®
Windows 98/2000/XP/Vista/7/8 operating system
• Minimum 64 MB of internal memory
• Minimum 40 MB of available hard disk space
• 8-speed CD-ROM drive
• 9-pin series port or USB port
Installation
Follow these steps to install the 930XC OTDR Trace Viewer software on a PC:
1. Start Microsoft
®
Windows.
2. Exit all other running applications that Windows is currently running.
3. Insert the installation disk into the CD-ROM drive, and locate the OTDR Trace Viewer folder.
4. Run 930XC OTDR Trace Viewer setup le to install.
5. Follow the step-by-step installation wizard instructions until installation is complete.