Instructions
930XC-20C • 930XC-20M • 930XC-30F • 930XC-30P
Tempo Communications Inc. 1390 Aspen Way • Vista, CA 92081 USA • 800-642-2155
6
Important Safety Information
SAFETY
ALERT
SYMBOL
This symbol is used to call your attention to hazards or unsafe practices which could result in an
injury or property damage. The signal word, dened below, indicates the severity of the hazard.
The message after the signal word provides information for preventing or avoiding the hazard.
Immediate hazards which, if not avoided, WILL result in severe injury or death.
Hazards which, if not avoided, COULD result in severe injury or death.
Hazards or unsafe practices which, if not avoided, MAY result in injury or property damage.
Read and understand all of the instructions and safety information in this
manual before operating or servicing this tool.
Failure to observe this warning could result in severe injury or death.
Electric shock hazard:
• Do not operate in an explosive atmosphere such as in the presence of ammable gases or
fumes.
• Before applying power, verify that the unit is set to match the available line voltage.
Failure to observe these warnings could result in severe injury or death.