Instructions

930XC-20C • 930XC-20M • 930XC-30F • 930XC-30P
Tempo Communications Inc. 1390 Aspen Way • Vista, CA 92081 USA • 800-642-2155
8
Important Safety Information (cont’d)
Electric shock hazard:
• Do not expose batteries to re or intense heat. Do not open or mutilate batteries. Avoid
touching the electrolyte in the batteries, which is corrosive and may cause damage to eyes or
skin.
• Do not open the case of the unit for any reason. It contains no user-serviceable parts.
• Use this unit for the manufacturer’s intended purpose only, as described in this manual. Any
other use can impair the protection provided by the unit.
Failure to observe these precautions may result in injury and may damage the unit.
Instrument damage hazard:
• Make sure that the optical ber or cable is not in use and there is no laser beam in the ber
before testing with this unit.
• Do not leave the unit in direct sunlight or near direct sources of heat.
• Protect the unit from strong impacts or shock.
• Do not immerse the unit in water or store in areas with high humidity.
• When necessary, clean the case, front panel, and rubber cover with a damp cloth. Do not use
abrasives, harsh chemicals, or solvents.
• Replace the protective dust cap when the unit is not in use.
• Store the unit and interface adapters in a cool, dry, and clean place.
Failure to observe these precautions may result in injury and may damage the unit.
Electric shock hazard:
• Do not expose the unit to extremes in temperature or high humidity. Refer to “Specications.”
• Turn the unit off, disconnect from power, and make sure the laser source is off before
cleaning.
Failure to observe these precautions may result in injury and may damage the unit.