Instructions / Assembly

To make weather tight satellite or cable TV “F” cables:
Step 1 - Strip cable.
Strip .25” through shield braid &
dielectric to the center conductor.
Detailed instructions inside. Instrucciones detailadas incluida.
Satellite & Cable TV Tool Bundle
70018
Phone: [phone]
Int’l Phone: [phone]
Website: www.datasharktools.com
by Paladin Tools
All the tools you need
to do-it-yourself!
Step 2 - Prep the cable
and make cable assembly.
Flare the shield braid back from the dielectric.
(If using RG6 Quad cable, peel & remove the
inner shield braid back from the dielectric).
Fold the shield back over the cable.
Step 3 - Terminate
connector onto cable.
Insert the cable assembly into the tool.
Squeeze handles firmly together to make the
compression crimp. Pull with your hands to
make sure the connector is secured to the cable.
Then strip another .25” back but
do not pierce the shield braid.
Insert the cable into the
connector until the dielectric
is flush with the hole.
©2008 Greenlee Textron, Inc. All rights reserved. All trademarks property of Greenlee Textron, Inc. 70018PKG 07/08 TMS
RG59
RG6 &
RG6 Quad
Quantity DataShark Paladin Tools
10-Pk clam
50-Pk jar
10-Pk clam
50-Pk jar
N/A
N/A
70024
N/A
9642
9645
9643
9646
Cable Type
70018PKG 7/21/08 10:10 PM Page 2