Operation Manual

SAT mode
Entering the position
SAT mode
This display indicates that the system is in signal reception mode.
Press to display the currently received satellite.
„Entering the position“ is a selectable option of the main menu. Press to access
a list of countries, and use the buttons to scroll the list and use to se-
lect your location. This speeds up the satellite search.
The antenna is then optimally adjusted for the satellite search from your current
position (LNB and inclination angle).
12
Swap satellite
Run a faster satellite change with the keypad.
In the „swap satellite“ - Menu can be programmed up to four request satellites.
Then these satellites can directly be adjusted with the OK - button.
The programming of the desired satellite to the four positions in the
„SAT-change“ - menu is done with the setting option „SAT“ position.
Adjustment path: „Main Menu“, „Settings SAT“ and „SAT“ position.
Set after a position(1 ... 4), is here a satellite from the satellite list selected and
stored.
At a swap satellite the satellite positions are directly approached.
The requirement for direct satellite positioning is, the new position was set before
and is known. Otherwise, the antenna restrained like the „automatic search“.
First it moves to the X position „0“ and from here it search the adjusted satellite.