Operation Manual

Satellite settings / DiSEqC: on / off
Satellites are changed using the receiver‘s DiSEqC signals. The signals or the
DiSEqC ID of the receiver must comply with the ID list saved in the control unit of
your Vision system.
16 satellites with a DiSEqC ID number are preset in your Vision system
(see table).
The DiSEqC function is active when the DiSEqC option has been enabled or if
„DiSEqC“ is set to On with the Vision III control unit being on!
No. Satellite name DiSEqC ID
1 Astra 1 19.2° East 1
2 Astra 2 28.2° East 5
3 Astra 3 23.5° East 3
4 HotBird 13.0° East 2
5 Eutelsat 5 West 5.0° West 4
6 Thor/Intel 10-02 1.0° West 7
7 Astra 4 5.0° East 6
8 Eutelsat 16 16.0° East 15
9 Eutelsat 7 7.0° East 9
10 Amos 2/3 4.0° West 13
11 Hispasat 30.0° West 21
12 Telstar 12 15.0° West 17
13 Eutelsat 9 9.0° East 18
14 Eutelsat 33 33.0° East 24
15 Hellas Sat 2 39.0° East 10
16 Türksat 2/3 42.0° East 11
Here you can adopt the default settings of the Vision system into your satellite
receiver. Please refer to the manual of your receiver.
Important:
Further DiSEqC functions (DiSEqC V3-ID, DiSEqC Rec-ID, DiSEqC Data) are only
accessible if „DiSEqC: on/off“ is set to „on“ !
22