User's Manual
Bi‐DirectionalWirelessIRRepeaterSystemUserGuide
dongles as how many groups that are needed for setup. They may not be in the same room.
Place the other dongles at Clint sides, near the devices you want to control. Multiple dongles
for multiple rooms. Connect the dongles with USB power adaptors, or insert the dongle
(wireless USB IR Dongle) to the USB jack in the back of a device.
Step2: Connecting the cables
Plug-in the IR target cable to the “IR TARGET” of the dongle that receive IR signals from the
Remote Control.
Plug-in the IR emitter cables to the “IR EMITTER” of the dongle that is near the devices you
want to control
Step3. Adjustment the IR TARGET and IR EMITTER
Place the “IR TARGET CABLE” so that it can be directly aimed with the Remote Control.
Place the “IR EMITTER CABLE” on the devices you want to control
Aim the IR EMITTER EYE on each device (IR RECEIVER EYE) you want to control
Step4: Adjust the Pairing switch
Based on your grouping idea, adjust all Pairing switch on the dongles you want to control. Both
at the device sides and the Remote Control sides.
Step5: Have fun with the wireless IR control
Power on and enjoy.
Application４: Bi-Directional Control
Step1: Connecting with the power
Place the dongles in two rooms. Each room may have an equipment to be controlled from the
other room and a Remote Control to control a target equipment in the other room. Connect the
dongles with USB power adaptors, or insert dongle (wireless USB IR Dongle) to USB jack in
the back of a devices.
Step2: Connecting the cables
For each dongle in each room, plug-in the IR target cable to the “IR TARGET” and IR emitter
cables to the “IR EMITTER”.
Step3. Adjustment the IR TARGET and IR EMITTER
Place the “IR TARGET CABLE” so that it can be directly aimed with the Remote Control.
Place the “IR EMITTER CABLE” on the devices you want to control
Aim the IR EMITTER EYE on each device (IR RECEIVER EYE) you want to control
Step4: Adjust the Pairing switch
Adjust all Pairing switch and make sure both IR Wireless Repeater dongles are set to the
same channel.
Step5: Now the dongle can forward the Remote Control signal to the other room and send IR