User's Manual
Bi‐DirectionalWirelessIRRepeaterSystemUserGuide
signals that is
received via the RF from the other room. Power on and enjoy.
Trouble Shooting
Case Phenomena Description Trouble shoot
1 The distance between remote control and
IR Receiver is short (perhaps less than 5
Meters)
Please make sure the battery in the remote
control is sufficient. (Because the working
distance between IR Receiver and remote
control is determined by the IR signal power of
your remote controller.
Try to replace the old battery with the new battery
in your remote controller.
2 Target device does not work with your IR
Kit
Usually, this kit should work perfectly across
various brand of remote controller. In rare case, if
you encounter this problem, please report the
model number for your device to us. Customer
service will take care of you.
3 I have connected the way as the user
manual said, but still cannot get this kit to
work.
Please check the material of your cabinet.
If your cabinet is made by metal, Radio
Frequency may not pass through. We
recommend to relocate our device outside of the
cabinet, and make sure Radio Frequency can
function as the product is designed.
4 In manual, it said it can work “within or
over 100 meters open space”, but why it
may just work 50 Meters for me.
“Open space” means there’s nothing between “IR
Receiver” and “IR Emitter”. So, for the RF
distance between “IR Receiving unit” and “IR
Emitter unit” could be reduced by wall, cabinet,
furniture, etc.