Specifications

In-Wall CSR Bluetooth v5.0 Music Receiver

Specifications & Features

 Audio Inputs :Bluetooth receiver or stereo audio line level .

 Audio source select: Source is auto switch, the priority is BT first when playing.

 Audio output: Stereo audio phone jack or 3-pin Screw terminal.

 Power input(5VDC): Power jack or 3-pin Screw terminal.

 Stereo audio output: For connection to any speaker system.

 Bluetooth version: v5.0.

 Bluetooth receive Distance:10 Meters.

 Power source:5VDC/1A

Bluetooth Blue LED Status :

 Pairing mode: 1s on/off(0.5ms/0.5ms) flash 1 times

 Linked mode: Always on

 Connectable mode: 5s on/off(0.5ms/4.5ms) flash 1 times

How about use button to pairing :

§ Press button 3 seconds to boot, press button 3 seconds to off.

§ The first pairing, hold down button 5 seconds to make the Bluetooth pairing boot.

§ The pairing timeout limit is 90 seconds.

§ If pairing timeout, you need hold down button 1 second to re-pairing.

PAGE 1
In-Wall CSR Bluetooth v5.0 Music Receiver Specifications & Features  Audio Inputs :Bluetooth receiver or stereo audio line level .  Audio source select: Source is auto switch, the priority is BT first when playing.  Audio output: Stereo audio phone jack or 3-pin Screw terminal.  Power input(5VDC): Power jack or 3-pin Screw terminal.  Stereo audio output: For connection to any speaker system.  Bluetooth version: v5.0.  Bluetooth receive Distance:10 Meters.
PAGE 2
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 3