Installation Guide

Horizontal Installation
1. Install posts with pre-drilled holes for each layer
of net required during the growth cycle slightly
further apart than the width of your Tenax
Hortonova Trellis Net.
2. Attach a wooden crossbar between the posts at
the first level.
3. Secure the net to the post with nylon string.
4. Run a cable along the edge of the netting and
vertical support posts for added support.
5. Add additional layers of Hortonova Trellis Net as
the growth cycle progresses.
Hortonova Trellis Net
Installation Guide
TENAX CORPORATION - 4800 E. Monument Street - Baltimore, MD 21205 - phone [phone] - fax [phone] - www.tenaxus.com
Vertical Installation
1. Set supporting posts 25 feet apart
and stretch a cable from the top of
one post to the other.
2. Secure the net to the initial post with
a nylon string.
3. Attach netting along the cable by
running the nylon string trough the
top meshes.
Step 1 Step 2 Step 3
Step 4 Step 5
Step 1 Step 2 Step 3