Product specifications
Table Of Contents
- Copyright Statement
- Chapter 1 Product Overview
- Chapter 2 Hardware Installation
- Chapter 3 Working Modes Overview
- Chapter 4 Login to Web Utility
- Chapter 5 Quick Setup for Internet Access in 5 Working Modes
- Chapter 6 Network
- Chapter 7 Wireless
- Chapter 8 DHCP Settings
- Chapter 9 Advanced Applications
- Chapter 10 Security
- Chapter 11 Routing Settings
- Chapter 12 Tools
- Appendix 1：How to connect to an encrypted wireless network
- Appendix 2: Glossary
- Appendix 3: FAQs
- Safety Regulatory Statement
Wireless N150 Mini AP/Router
49
Chapter 8 DHCP Settings
The DHCP server feature is only available in WISP Mode and
Wireless Router Mode.
8.1 DHCP Server
The Dynamic Host Configuration Protocol (DHCP) is an
automatic configuration protocol used on IP networks. If you
enable the built-in DHCP server on the device, it will
automatically configure the TCP/IP settings for all your LAN
computers (including IP address, subnet mask, gateway and DNS
etc), eliminating the need for manual intervention.
DHCP Server-Enable: Check or uncheck the box to enable or
disable the device’s DHCP server feature.
Start IP Address: Enter the starting IP address for the DHCP
server’s IP assignment.
End IP Address: Enter the ending IP address for the DHCP