User Manual
Table Of Contents
- 1 Introduction
- 2 Set up to access the internet
- 3 Web UI description
- 4 Internet Status
- 5 Internet Settings
- 6 WiFi Settings
- 7 Guest Network
- 8 Parental Control
- 9 VPN
- 10 USB App
- 11 Advanced Settings
- 12 System Settings
- Appendixes
4
Port/Button
Description
WiFi
Used to enable/disable the WiFi network of the router.
RST/WPS
Used to start the WPS negotiation process of the router, or to reset the router.
− WPS: Press the button of the router, and enable the WPS function of another
device within 2 minutes to establish a WPS connection.
− Reset: When the SYS indicator blinks, hold the button down for about 8
seconds. The router is reset successfully when the SYS indicator lights solid on.
3
By default, it is a LAN port. But after the IPTV function of the router is enabled, it
functions only as an IPTV port used to connect to a set-top box.
1/2
They are LAN ports used to connect to devices such as computers and switches.
WAN
Used to connect this router to the internet.
POWER
Used to connect to the power adapter included with the package.
USB
(AC10U only)
Used to connect to a portable USB device.
1.2.3 Label on the bottom of the router
The bottom label shows the SSID, WiFi password and login IP address/domain name, pin code of the router. See
the following figures:
（2）
（1）
（3）
（4）
（5）