User Manual
Table Of Contents
- 1 Introduction
- 2 Set up to access the internet
- 3 Web UI description
- 4 Internet Status
- 5 Internet Settings
- 6 WiFi Settings
- 7 Guest Network
- 8 Parental Control
- 9 VPN
- 10 USB App
- 11 Advanced Settings
- 12 System Settings
- Appendixes
104
Step 3 Set a static route rule on AC10/AC10U.
1. To access the configuration page, click Advanced Settings > Static Route.
2. Destination Network: Enter IP address of the destination network, which is 172.16.105.0 in this
example.
3. Subnet mask: Enter subnet mask of the destination IP address, which is 255.255.255.0 in this example.
4. Gateway: Set Gateway to the LAN IP address of Router 2, which is 192.168.1.20 in this example.
5. Click +New.
--End
Configuration succeeds.