User Manual
Table Of Contents
- 1 Introduction
- 2 Set up to access the internet
- 3 Web UI description
- 4 Internet Status
- 5 Internet Settings
- 6 WiFi Settings
- 7 Guest Network
- 8 Parental Control
- 9 VPN
- 10 USB App
- 11 Advanced Settings
- 12 System Settings
- Appendixes
109
4. Register on the website of the selected DDNS service provider. Assume the registered information are
listed as follows:
- Service Provider: dyndns.org
- User Name: Tenda
- Password: 12345678
- Domain Name: tenda.dyndns.org
Step 2 Set DDNS
1. To access the configuration page, click Advanced Settings > DDNS.
2. DDNS: Switch to .
3. Service Provider: Select dyndns.org from drop-down-box.
4. User Name: Enter the user name registered on DDNS service provider's website, which is Tenda in this
example.
5. Password: Enter the password registered on DDNS service provider's website, which is 12345678 in this
example.
6. Domain Name: Enter domain name registered on DDNS service provider's website, which is
tenda.dyndns.org in this example.
7. Click Save.
Wait until the connection status changes to Connected.