User Manual
Table Of Contents
- 1 Introduction
- 2 Set up to access the internet
- 3 Web UI description
- 4 Internet Status
- 5 Internet Settings
- 6 WiFi Settings
- 7 Guest Network
- 8 Parental Control
- 9 VPN
- 10 USB App
- 11 Advanced Settings
- 12 System Settings
- Appendixes
110
Step 3 Set Virtual Server function. For detailed steps, please refer to 11.10 Virtual Server in this guide.
--End
Verification
The visit path for internet users to access intranet resources is: http://domain name: server port, which is http://
tenda.dyndns.org.net:80 in this example. Then perform according to onscreen instructions.
11.10 Virtual Server
Usually, internet users cannot access LAN through router, but internet users can visit LAN resources on router by
enabling virtual server. After the Virtual Server function is configured, if one host in LAN has Web or FTP server,
internet users can access that server successfully.
To access the configuration page, click Advanced Settings > Virtual Server.