User Manual

112
11.10.1 Adding a virtual server rule
1. To access the configuration page, click Advanced Settings > Virtual Server.
2. Internal IP Address: Enter IP address of the internal sever, which is 192.168.0.110 in this example.
3. LAN Port: Click drop-down list box and select internal service port number or enter the number
manually, which is 21 in this example.
4. Protocol: Select protocol of a service from the drop-down list box, which is TCP&UDP in this example.
5. Click +New.
--End
The rule is added successfully. See the following figure:
11.10.2 Deleting a virtual server rule
1. To access the configuration page, click Advanced Settings > Virtual Server.
2. Select the rule you want to delete, and click .
--End