User Manual
Table Of Contents
- 1 Introduction
- 2 Set up to access the internet
- 3 Web UI description
- 4 Internet Status
- 5 Internet Settings
- 6 WiFi Settings
- 7 Guest Network
- 8 Parental Control
- 9 VPN
- 10 USB App
- 11 Advanced Settings
- 12 System Settings
- Appendixes
116
2. DMZ Host: Set to .
3. DMZ Host IP Address: Enter the last part of the IP address of the computer to be set to DMZ host, which
is 110 in this example.
4. Click Save.
--End
11.12 UPnP
Universal Plug and Play (UPnP) is a set of networking protocols. This function enables the router to open ports for
LAN apps supporting UPnP, which improves user experience.
To access the configuration page, click Advanced Settings > UPnP.
After UPnP is enabled, port transfer information displays on the configuration page when UPnP application, such
as Thunder, is running in the LAN network. Port transfer information is provided when apps make requests. See
the following figure: