User Manual

121
Parameter
Description
Device Name
It specifies the name of the device to be bound with a fixed IP address.
MAC Address
It specifies the MAC address of a device.
IP Address
It specifies the IP address to be bound with the device indicated by the corresponding MAC
address.
Status
It indicates whether a device is connected to the router or not.
Operation
It is used to edit a DHCP Reservation rule, including four operations:
- +New : It is used to add a DHCP Reservation rule.
- : It is used to bind a device with a static IP.
- : It is used to unbind a device with a static IP.
- : It is used to delete a DHCP Reservation rule.
12.2.1 Adding a DHCP reservation rule
1. To access the configuration page, click System Settings > DHCP Reservation.
2. Device Name: Enter the device name used to assign static IP addresses, which is Web Server in this
example.
3. MAC Address: Enter the MAC address of the device, which is C8:3A:35:13:05:18 in this example.
4. IP Address: Enter the static IP address assigned to the device, which is 192.168.0.110 in this example.
5. Click +New.
--End
The DHCP reservation rule is added successfully. See the following figure:
12.2.2 Deleting a DHCP reservation rule
1. To access the configuration page, click System Settings > DHCP Reservation.