User Manual
Table Of Contents
- 1 Introduction
- 2 Set up to access the internet
- 3 Web UI description
- 4 Internet Status
- 5 Internet Settings
- 6 WiFi Settings
- 7 Guest Network
- 8 Parental Control
- 9 VPN
- 10 USB App
- 11 Advanced Settings
- 12 System Settings
- Appendixes
132
Parameter description:
Parameter
Description
Remote
Management
Used to enable/disable the remote management function. By default, this function is
disabled.
Remote IP
Address
It specifies the IP address that can access the router remotely.
Port
It specifies the port number needed when you manage the router remotely. The default port
number is 8080, which can be modified if necessary.
Since ports 1 to 1024 are used by well-known service, you are strongly
recommended to set the value in the range of 1025~65535 to prevent port
confliction.
12.9.2 Configuring remote management
1. To access the configuration page, click System Settings > Remote Management.
2. Remote Management: Set to .
3. Remote IP Address: Set the IP address allowed to access the router remotely.
4. Port: Set the port number used for remote access. You are recommended to keep the default value if
you do not have special requirement.
5. Click Save.