User Manual
Table Of Contents
- 1 Introduction
- 2 Set up to access the internet
- 3 Web UI description
- 4 Internet Status
- 5 Internet Settings
- 6 WiFi Settings
- 7 Guest Network
- 8 Parental Control
- 9 VPN
- 10 USB App
- 11 Advanced Settings
- 12 System Settings
- Appendixes
139
Parameter description:
Parameter
Description
System
Reboot
Schedule
Used to enable or disable the system reboot schedule function.
Reboot At
It specifies the time for the router to reboot.
Delay
It specifies the premise for the router to delay a reboot.
- Selected: The router reboots automatically when there are devices connected to the
router, and the traffic over the WAN port is less than 3 KB/s for 30 minutes; or there are
no device connected to the router, and the traffic over the WAN port is less than 3 KB/s
for 3 minutes.
- Unselected: The router reboots automatically when the time for the router to reboot is up.
12.12.2 Configuring system reboot schedule
1. To access the configuration page, click System Settings > Automatic Maintenance.
2. Reboot At: Select the time to reboot from the drop-down list box, which is 23:30 in this example.
3. Click Save.