User Manual

28
Parameter description:
Parameter
Description
WAN Port
It specifies the current status of the WAN port of the router, including Ethernet cable
connected and Ethernet cable disconnected.
Connection Type
It specifies how the router is connected to the internet. This router supports three
connection types: PPPoE, dynamic IP address, and static IP address. Please select your
connection type according to your actual situation.
ISP User Name
Enter the user name provided by your ISP.
ISP Password
Enter the password provided by your ISP.
DNS Settings
It specifies how the router obtains DNS information. This item is only needed when you
choose to connect the router to the internet by PPPoE or dynamic IP address.
- Automatic: The router obtains DNS information from upstream device automatically.
- Manual: You need to enter correct DNS information manually.
IP Address
The information is required only when you choose to connect the router to internet by
static IP address. Enter the IP address and other information provided by your ISP
manually.
Subnet Mask
Default Gateway
Primary DNS
Server
Secondary DNS
Server
Connection Status
It specifies whether the router is connected to the internet. If the “Connected. You can
access the internet now.” message appears, the router is connected to the internet
successfully and you can access the internet through your router. Otherwise, the router
fails to connect to the internet. Please perform according to the onscreen instructions.
Connection
Duration
It specifies how long the router is connected to the internet successfully this time.
5.2 Setting up an internet connection with PPPoE
Procedures:
1. Click Internet Settings.
2. Connection Type: Select PPPoE from the drop-down list box.
3. ISP User Name: Enter the user name provided by your ISP.
4. ISP Password: Enter the password provided by your ISP.
5. Click Connect.