User Manual
Table Of Contents
- 1 Introduction
- 2 Set up to access the internet
- 3 Web UI description
- 4 Internet Status
- 5 Internet Settings
- 6 WiFi Settings
- 7 Guest Network
- 8 Parental Control
- 9 VPN
- 10 USB App
- 11 Advanced Settings
- 12 System Settings
- Appendixes
38
6.3 Wireless Repeating
6.3.1 Overview
The Wireless Repeating function enables the router to expand WiFi coverage by connecting to the WiFi network
of an upstream router. This router supports two wireless repeating modes: WISP and Client+AP.
If repeating the WiFi hotspot provided by ISP, you are recommended to select WISP. Otherwise, select
WISP or Client+AP.
To access the configuration page, click WiFi Settings > Wireless Repeating. By default, the Wireless Repeating
function is disabled.
Set the wireless repeating button to . Then the following figure appears:
If wireless repeating is enabled, the Sleeping Mode, IPTV Function, Guest Network, WPS, Tenda App, and WiFi
Schedule functions become unavailable. You can find their icons disappear on the WiFi Settings page.
Parameter description:
Parameter
Description
Wireless Repeating
Used to enable/disable the Wireless Repeating function.