User Manual
Table Of Contents
- 1 Introduction
- 2 Set up to access the internet
- 3 Web UI description
- 4 Internet Status
- 5 Internet Settings
- 6 WiFi Settings
- 7 Guest Network
- 8 Parental Control
- 9 VPN
- 10 USB App
- 11 Advanced Settings
- 12 System Settings
- Appendixes
39
Repeating Mode
It specifies how the router repeats the upstream WiFi network.
-
WISP: The router repeats WiFi hotspot provided by ISP or ordinary WiFi network.
-
Client+AP: The router repeats ordinary WiFi network.
Upstream WiFi
Name
It specifies the name of the WiFi network you decide to repeat. You can select it from
the drop-down list box.
Upstream WiFi
Password
It specifies the password of the WiFi network you decide to repeat. This parameter
appears after you select the upstream WiFi name.
6.3.2 Example
Scenario
Michael bought a wireless router for network after having broadband service. The router is placed in the living
room. WiFi signals are strong in the living room and master bedroom, but too poor in the other bedrooms and
restrooms to access the internet. Now he wants to expand the WiFi coverage, ensuring devices to access the
internet everywhere.
Solution
Michael can buy an AC10/AC10U, and set the wireless repeating function on it to expand the WiFi network
coverage of the original router. Thus, devices in dead zones can access the internet through the WiFi signal of
AC10/AC10U. See the following figure: