User Manual
Table Of Contents
- 1 Introduction
- 2 Set up to access the internet
- 3 Web UI description
- 4 Internet Status
- 5 Internet Settings
- 6 WiFi Settings
- 7 Guest Network
- 8 Parental Control
- 9 VPN
- 10 USB App
- 11 Advanced Settings
- 12 System Settings
- Appendixes
40
Procedures:
1. Click WiFi Settings > Wireless Repeating.
2. Set the wireless repeating button from to .
3. Select WISP or Client+AP.
4. Upstream WiFi Name: Select the WiFi name of the original router from the drop-down list box, which is
majianwei in this example.
5. Upstream WiFi Password: Enter the password of the WiFi network of the original router, which is
12345678 in this example. (If the wireless network of the upstream router is unencrypted, leave this box
blank.)
6. Click Save.
7. Click OK.
--End
Verification
After the message “Connected. You can access the internet now.” appears on the Internet Settings page and the
Internet Status page appears as the second figure, devices can access the internet through the WiFi network of
AC10/AC10U.